Automotive
Demineralized water for paint lines, surface pretreatment and rinses.
Industrial reverse osmosis (RO)
Industrial reverse osmosis plants in Mexico
Process water and demineralized water from wells, city supply, water trucks or recovered water. We design, build, install and operate your reverse osmosis plant, from 1 to 2,000 m³ per day.
1–2,000m³ per day, sized for your plant
≈0.0001 µmmembrane pore: removes almost all salts
Turnkeyengineering, civil, electrical and commissioning
$0*upfront with rental or pay per use, subject to evaluation
What it is
Nearly salt-free water, every day.
Reverse osmosis pushes water at high pressure through a membrane so fine that water passes and almost all dissolved salts, hardness, silica and ions stay behind. The result is demineralized (DI) water or process water with the conductivity your line needs.
An industrial RO plant is more than the membrane skid: pretreatment decides how long membranes last and what the plant costs to run. That is why we start with a water analysis and design the full train, from the inlet to the treated water tank.
- Custom pretreatment: multimedia filters, activated carbon, softeners or ultrafiltration
- High-pressure pumps, pressure vessels and instrumentation
- PLC control panel and clean-in-place (CIP) system
- Ion exchange polishing and UV disinfection when higher purity is required
How it works
From raw water to DI water.
A typical demineralized water train. Each stage is defined by your water analysis.
- Raw waterWell, city supply, water trucks or recovered water.
- PretreatmentRemoves sand, sediment, chlorine and organics to protect the membranes.
- High pressurePumps bring the water to membrane operating pressure.
- RO membranesSplit permeate (treated water) from the reject that carries the salts.
- DI waterReady for process, boilers or final polishing. The reject can be recovered.
Applications
Where is reverse osmosis used?
Any process that needs water with low dissolved salts or controlled conductivity.
Boilers
Feed water free of hardness and silica to prevent scaling and downtime.
Cosmetics
Purified water for formulation and equipment cleaning.
Chemicals
Demineralized process water with stable conductivity.
Metallurgy
Water for surface treatment rinses and cooling.
Manufacturing
Process and utility water with consistent quality.
What's included
One partner, end to end.
We do not just sell equipment: we hand over a working plant.
- 01Analysis and engineeringWater analysis, mass balance, sizing and 3D model before building.
- 02Shop fabricationWe assemble and test the equipment before shipping it to your plant.
- 03Civil works and installationCivil works, rigging, piping and tie-ins, including work at height.
- 04Electrical and controlsPanels, PLC and instrumentation so the plant runs on its own.
- 05Commissioning and trainingStart-up and training for your staff.
- 06Operation and maintenanceService plans, spare parts, membrane cleaning and follow-up.
Business models
Buy, rent or pay per use.
Same equipment, same engineering. Rental and pay per use require no upfront investment, subject to technical, financial and contractual evaluation.
Purchase
One-time investment. You own the asset and can depreciate it.
See how it works →Rental
Fixed, predictable monthly fee, no upfront investment.
See how it works →Pay per use
We provide and operate everything; you pay per liter or m³ treated.
See how it works →
FAQ
Frequently asked questions.
01How much does an industrial reverse osmosis plant cost?
It depends on flow, feed water quality, required quality, civil works and installations, so we quote after a free assessment. You can also rent it or pay per use, with no upfront investment (subject to technical, financial and contractual evaluation).
02What sizes do you build?
From 1 to 2,000 m³ per day (1,000 to 2,000,000 liters per day), sized for each plant.
03What happens to the RO reject?
The reject (concentrate) carries the salts removed by the membranes. Many plants send it to drain; we can treat it to recover a large share of that water and return it to the process.
04Do you work with foreign companies?
Yes. We work in English, quote in US dollars or Mexican pesos and build to your corporate specifications.
05Can you operate and maintain the plant?
Yes. We offer maintenance plans and, under pay per use, we operate and maintain the system while you pay per liter or cubic meter treated.
More services
You may also need.
Free assessment
Tell us about your project.
An engineer reviews your information and gets back to you, in English. Free, no obligation.
- Since 2017, based in Mexico City
- Projects across all of Mexico
- Systems from 1 to 2,000 m³/day
- English and Spanish
Prefer to talk to someone? +52 55 9023 6888 · lucia@contacto.aquargentum.com